Trouble Shooting Through The Osd - Barco Galaxy NW-12 User Manual

Hardware errors
Description
Invalid firmware
PB comm
Power supply fail
Invalid firmware
XFAN comm
Cooling supply fail
Cyclone configure
Cyclone init
Cyclone file error
PIP configure
PIP init
PIP file error
Warp configure
Warp init
Warp file error
Preformatter configure
Preformatter init
Preformatter file error
DVI-out configure
DVI-out init
DVI-out file error
9.2

Trouble shooting through the OSD

What can be done ?
The projector bus allows the diagnostic of different hardware components divided in two main groups.
• I 2 C diagnostics : a number of internal electronic boards can be diagnosed and a graphical interface shows whether an error is
Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time.
•
• Formatter : Allows to monitor the status and communication of the formatter and satellites
• Cooling : the measured temperatures can be monitored as well as the different fan speeds
• Display mode : allows to monitor the signal characteristics (frequency and mode) at the last image process stage (display)
• Warning messages : setting the warning messages ON will allow to receive on screen warning messages
How to display the I
1. Press MENU to activate the Tool bar
2. Press → to select the Service item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Use ↑ or ↓ to select I
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
Location
PB
PB
PB
XFAN
XFAN
XFAN
PMP
PMP
PMP
PMP
PMP
PMP
PMP
PMP
PMP
Preformatter
Preformatter
Preformatter
Output layer
Output layer
Output layer
C diagnostics menu ?
2
C and press ENTER
2
Message
Prefix Code
H 10 PB firmware
H 11 power fail
H 12 power fail
H 20 XFAN firmware
H 21
cooling fail
H 22 cooling fail
H 30 FPGA config error
H 31 FPGA init error
H 32 FPGA file error
H 40
FPGA config error
H 41 FPGA init error
H 42 FPGA file error
H 50 FPGA config error
H 51
FPGA init error
H 52 FPGA file error
H 60 FPGA config error
H 61 FPGA init error
H 62 FPGA file error
H 70
FPGA config error
H 71 FPGA init error
H 72 FPGA file error
9. Trouble shooting
203