Image 4-33
4.5.13.2 Linked Dynacolor
Linking Dynacolor in a multichannel system
The linking of the projectors to allow Dynacolor and CLO information interchange is done via the Ethernet connection.
To set the projector as Master see "Setup of the linked projectors in a multichannel system".
4.5.13.3 Linked stereo
Linking stereo in a multichannel system
The genlocking for stereo is done using a coax link.
The projectors are connected in a daisy chain. Only the output side may drive IR-emitters.
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
4. Installation
Switch
37