Installing The Fan Outlet; Lamp: Screws; Fan Outlet: Installing - Barco Galaxy NW-12 User Manual

8. Maintenance
- cathode
- anode
- lamp info connector (bottom side of the lamp)
Caution: If the lamp doesn't slide in smoothly, gently wiggle it until it does.
Since the lamp info connector has some backlash, it might not be fully in line with its plug (especially if the projector
is not in table mode) making it hard to get it connected. By wiggling the lamp, the correct alignment of the lamp info
connector can be easily achieved.
5. Fix the lamp using the two no-drop screws
Image 8-17

Lamp: screws

6. Install the fan outlet (muffler) (see concerning chapter)
7. Install the rear cover (see concerning chapter)
8.6.6

Installing the fan outlet

Necessary tools
Slotted screwdriver 5 mm
How to install the fan outlet?
1. Put the fan outlet in the right position
Image 8-18

Fan outlet: installing

2. Fix the fan outlet to the projector using the fixing screw
198 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013