Installation; Active Infitec; Tm Wheel Index - Barco Galaxy NW-12 User Manual

Image 7-220

7.10 Installation

Overview
• Active Infitec TM wheel index
• Internal Patterns
• Scaled patterns
• Formatter patterns
• Stereo sync out
• LFR
• Convergence
Not all the menu items of the Installation menu are handled in this chapter. The other items are treated in the
Installation, page 13 or Setup chapter, page 41.
7.10.1 Active Infitec
What can be done ?
The Infitec wheel is running at a high speed and separates the left and right image to obtain stereoscopic projection.
TM
The wheel index is the adjustment that sets the wheel reference position. This reference setting will allow the perfect alignment of
the wheel with the data image processing (left/right image processing).
C
AUTION
optimal image quality.
An optional Infitec™ wheel assembly is needed to be installed first (by default not present) in the Galaxy NW-7
and then adjusted through OSD.
Projectors Galaxy NW-12 and Galaxy NH-12 have the Infitec™ wheel assembly installed on it initially (by de-
fault from factory) and thus only require an adjustment through OSD.
How to adjust the Infitec
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Infitec wheel index...
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
wheel index
TM
:
This setting is only for Barco certified service personnel. Changing this setting may not guarantee
wheel index ?
TM
7. Advanced
177