Visual Checks - Barco Galaxy NW-12 User Manual

8. Maintenance
Runtime driven maintenance
Frequency
500 hours lamp runtime
750 hours lamp runtime
Condition based maintenance
Condition
New version of Projector
Software
New version of Twin DVI
input board firmware
New Info-T
Changes in projector
settings
8.2

Visual checks

If visual inspection reveals damage or abnormalities of any kind, contact your qualified technical service per-
sonnel. If they can not solve the issue or if they are not sure about the way to proceed, they can escalate the
issue to a Product Specialist, a Product Expert or to Barco Helpdesk http://www.barco.com/en/Support.
Visual check of the projector housing
1. Check if all screws, bolts and nuts are present and tight.
Insert missing screws or bolts, add missing nuts and/or tighten loose screws, bolts or nuts.
2. Check the housing on damage: deformation, discoloration, cracks, granulation.
Contact qualified technical service personnel in case of any damage.
3. Check for the presence of foreign elements/substances.
Remove any foreign element or substance if this action does not include, nor introduce any risk. Contact qualified technical
service personnel in case of doubt.
4. Check on moisture or leaking liquid.
Contact qualified technical service personnel in case of moisture or leaking liquid.
Visual check of the projector support
1. Check if all screws, bolts and nuts are present and tight.
Insert missing screws or bolts, add missing nuts and/or tighten loose screws, bolts or nuts.
2. Check the mechanical structure, plates, bolts and nuts on damage: deformation, cracks.
Contact qualified technical service personnel in case of any damage.
3. Check for the presence of foreign elements/substances.
Remove any foreign element or substance if this action does not include, nor introduce any risk. Contact qualified technical
service personnel in case of doubt.
4. Check on moisture or liquid.
Keep the support dry at all times.
Visual check of the projection lens housing
1. Check the housing on damage: deformation, discoloration, cracks, granulation.
Contact qualified technical service personnel in case of any damage.
2. Check for the presence of foreign element/substance.
1. In case of multiple channel display systems.
190
Maintenance task description
1
Color alignment
1
Brightness alignment
Lamp replacement
Evaluate color and brightness after lamp replacement and adjust
1
if required
Maintenance task description
Upgrade the Projector Software depending on availability and level
Upgrade the Twin Dual Link DVI input board depending on the
availability of the board and the firmware.
Perform the Info-T depending on availability and level
Make a backup of the projector using Projector Support tool
To be performed by
Qualified Product Specialist
Qualified Product Specialist
Qualified technical service
personnel
Qualified Product Specialist
To be performed by
Qualified Product Specialist
Qualified Product Specialist
Qualified Product Specialist
Qualified Product Specialist
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013