How to select a Dynacolor set ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select Active Set
7. Press → to open the menu
8. Use ↑ or ↓ to select for example Set1
Image 7-162
9. Press ENTER
A white bullet indicates the active setting
7.9.7.3
Enabling DynaColor
Enabling DynaColor can be done by the operator.
What can be done ?
Enabling DynaColor changes the projector's native color range to the color range as specified in the active DynaColor set. Disabling
DynaColor will keep the original colors determined by the source and the projector's optical path.
How to enable Dynacolor?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select Enable
7. Press → to open the menu
8. Use ↑ or ↓ to select ON
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
7. Advanced
143