Lamp Runtime Warning - Barco Galaxy NW-12 User Manual

7. Advanced
Values
Serial number
Article number
EEPROM version
Table 7-5
Lamp Information
How to display the lamp info ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Info...
Image 7-126
5. Press ENTER
A text box is displayed
Image 7-127
7.7.3

Lamp runtime warning

What can be done ?
When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime. This warning message can be removed by hitting Back on the RCU.
When the Warning messages are disabled in the hidden Service menu, the lamp runtime warning will only be
displayed at the next startup of the projector, not during a session. Enabling or disabling TextBox does not
affect the display of the lamp runtime warning.
122
Description
Unique serial number of the lamp
Article number of the lamp
version of the EEPROM used in the lamp housing
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013