Shift Adjustment - Barco Galaxy NW-12 User Manual

7. Advanced
Image 7-103
3. Use ↑ and ↓ to select the AxisLink radio buttons
Image 7-104
4. Use ← and → to select the ON or OFF radio buttons
5. Press ENTER to enable/disable the selected radio button
6. Press BACK to return to the Geometry Edit menu.
7.6.6.6

Shift Adjustment

What can be done with the Shift adjustment ?
With the Shift adjustment it is possible to shift the whole image. This is considered as a displacement of the 4 corner points of the
2x2 mode. The same dialog box is used as for the geometry edit.
How to use the Shift adjustment?
1. Start up the Geometry Edit menu
2. Press ↓ to select Shift ....
3. Press ENTER
A dialog box is displayed. Note that In the shift adjustment, the Adjust mode is selected by default (instead of the Select mode
for the other geometry adjustments).
4. Press ENTER to go to the Edit Mode
110 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013