Stereo Input Connections; Stereo Settings - Barco Galaxy NH-12 User Manual

4. Installation
Image 4-24

Stereo input connections

The BNC connectors are the stereo output sync signals. These signals will drive the emitters in case of active stereo projection
using active stereo glasses. The fact that the projector is providing two BNC is to allow the linking (stereo synchronization) of several
projectors in a multichannel projection system (see Multichannel installation).
The 2 BNC's are identical i.e. it does not matter to which BNC the emitter is connected.
How to connect the stereo input and output signals ?
1. Connect the mini-din male connector(s) to the projector's female mini DIN connector(s)
R / PR R / PR G / Y G / Y B / PB B / PB Hs / Cs Hs / Cs
DVI DVI COMPUTER COMPUTER
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
L1 L1 L2 L2
STEREO INPUT STEREO INPUT
RS 232 C RS 232 C
DESKTOP INPUT DESKTOP INPUT
Image 4-25
2. Connect the BNC connector to the stereo IR emitter

Stereo settings

Different stereo settings have to be done :
30
R / PR G / Y B / PB Hs / Cs Vs VIDEO S-VIDEO
R / PR R / PR G / Y G / Y B / PB B / PB Hs / Cs Hs / Cs Vs Vs VIDEO VIDEO S-VIDEO S-VIDEO
DVI DVI DVI COMPUTER COMPUTER COMPUTER
IN1 IN2 IN1 IN2 IN1 IN2
IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2 IN1 IN1 IN2 IN2
L1 L2 L3
L1 L1 L2 L2 L3 L3
STEREO INPUT STEREO OUTPUT
STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
RS 232 C RS 232 C RS 232 C DVI DVI DVI R.C. R.C. R.C.
Vs Vs VIDEO VIDEO S-VIDEO S-VIDEO
IN1 IN1 IN2 IN2
L3 L3
STEREO OUTPUT STEREO OUTPUT
DVI DVI R.C. R.C.
Image Generator
Image Generator
Image Generator
R59770122 BARCO GALAXY NH-12 20/01/2015
IR Emitter IR Emitter
Active Glasses