OPEN
Image 4-13
Power plug spring system
4.5.2
The front panel
View
The front panel of the projector can be divided in 2 major parts :
1.
Signal Input/Output section
2.
System input/output section
1
2
Image 4-14
Front panel connections
The signal input/output section
The input/output section has a modular architecture i.e. it is composed of several (5) slots which can be equipped with different input
modules :
The different available inputs that can be installed :
•
RGBHV, YUV & Video analog input
•
twin dual DVI input
•
Stereo inputs
•
SDI/HDSDI
•
DVI (HDCP) / D15
The different available outputs :
•
DVI output & RS232 IN
The projector is by default equipped as follows:
•
Layer 1: empty (can be fitted with any input board)
•
Layer 2: RGB, YUV & Video input board (fixed)
•
Layer 3: twin dual DVI input board (fixed)
•
Layer 4: Stereo input board (fixed)
•
Layer 5: DVI output and RS232 board (fixed)
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013
LOCKED
4. Installation
23