JRC JSS-2150 Instruction Manual page 88

Operation
4.4.2 Routine calls to a group of ships
For radiotelephone or FEC broadcasting, a DSC routine call to a group of ships can be made as
follows.
■ ■
Procedure
1 .
1 .
1 .
Press
MENU
hierarchical menus, select 1. DSC
non-distress call.
2 .
2 .
2 .
Select Call type and press ENT to move
the cursor to the right. Then use the jog
dial to select RTN/Group/TEL.
After selecting and pressing ENT, the cursor
moves to Address.
To specify the telex communication,
Note
select RTN/Group/FEC.
3 .
3 .
3 .
Select Address and press ENT to move
the cursor to the right and input the
group of ships' 9-digit MMSI.
4 .
4 .
4 .
To change the call frequency, select
Calling FRQ and press ENT to move the
cursor to the right, then input the Tx and
Rx frequencies with the numeric keypad.
When 2 is input using the numeric
-
Note
keypad, it appears on the far right
as shown in the screen on the
right.
- Press ENT for every setting of the
Tx and Rx frequencies.
5 .
5 .
5 .
Select Working FRQ and press ENT to
move the cursor to the right and input
the working frequency (radiotelephone
frequency) with the numeric keypad.
When 2 is input using the numeric
-
Note
keypad, it appears on the far right
as shown in the screen on the
right.
- After inputting press ENT.
4-38
key, and through
1)DSC non-distress call
Call type :[RTN/Indv/TEL
Address :[ ]
Calling FRQ:[Tx 2177.0kHz]
:[Rx 2177.0kHz]
Working FRQ:[Tx . kHz]
[Rx . kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[RTN/Group/TEL
Address :[ ]
Calling FRQ:[Tx 2177.0kHz]
:[Rx 2177.0kHz]
Working FRQ:[Tx . kHz]
[Rx . kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[RTN/Group/TEL ]
Address :[0 ]
Calling FRQ:[Tx 2177.0kHz]
:[Rx 2177.0kHz]
Working FRQ:[Tx . kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[RTN/Group/TEL ]
Address :[043123456]
Calling FRQ:[Tx .2kHz]
:[Rx . kHz]
Working FRQ:[Tx . kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[RTN/Group/TEL ]
Address :[043123456]
Calling FRQ:[Tx 2169.0kHz]
:[Rx 2169.0kHz]
Working FRQ:[Tx .2kHz]
[Call] [Preview] [Cancel]
]
]