JRC JSS-2150 Instruction Manual page 125

The screen at right is displayed,
and the operations are the same as
for making safety and urgency calls
to areas.
- To specify the northwest corner and
the south/north and east/west
deviation, select Corner/dev at
Format and press ENT in the
screen shown at right (below), and
input appropriate values.
5 .
5 .
5 .
Select Call and press ENT to tune the
antenna and make a distress relay call.
After completing the individual
Note
distress relay call to a coast station,
wait for the acknowledgement as
with the drobose call mentioned
above.
6 .
6 .
6 .
After sending a distress relay call to a coast
station, and when the acknowledgement is
received via DSC, the screen at right is
displayed.
The ALM lamp starts blinking, and the
call alarm gradually grows louder.
Press either the
silence the alarm and display Accept in the
handling menu.
Select Accept and press ENT to display the
status display and start distress
communication on the radiotelephone.
CANCEL key or ENT to
Operation
4-75