JRC JSS-2150 Instruction Manual page 137

Message
Error
The file name extension is allowed only
"DB".
Error
The file name extension is allowed only
"TLX".
Error
The file name is wrong.
Error
The file saving failed.
There is not enough room on the DTE drive.
Error
The keyboard is disconnected.
Error
The keyboard is not ready.
Error
The memory is already full.
So you cannot make a new file.
Error
The printer is not ready.
Check the paper and online status.
Error
The same file name already exists.
Error
The station ID is not present.
Error
There is a possibility of the USB IC failure.
All USB functions are disabled.
Error
There is not enough room on the DTE main
drive. Delete some files, or change the
folder.
Error
There is not enough room on the USB drive.
Delete some files, or change the folder.
Error
Two or more channels are needed.
Error
Tx/Rx frequency is not present.
Buttons
OK
Input "DB" as the correct extension.
OK
Input "TLX" as the correct extension.
The specified file is not found, or
OK
the file name to be copied is wrong.
No file can be saved because the
OK data terminal has no sufficient
vacant memory.
The keyboard is disconnected and no
----- control for the data terminal is
available now.
Malfunction is detected at the
----- keyboard I/F and the keyboard is no
longer available now.
The number of files exceeded
OK maximum value (100), so a new file
cannot be made.
The printer cannot be used. Confirm
OK
that paper is put on or that it is
online.
This file name already exists, and is
OK
no longer available now.
SELCAL number (ID) is not
OK
registered in the specified radio
station.
Detected the USB IC failure. And now
OK
out of work here.
The data terminal has no sufficient
OK
vacant memory. Delete files or
change the folder adequately.
The USB memory has no sufficient
OK vacant area. Delete files or change
the folder adequately.
Register two or more channels to
OK start scanning of the specified
station..
The frequency is not registered in the
OK
specified radio station.
Operation
Description
4-87