JRC JSS-2150 Instruction Manual page 174

150w mf/hf radio equipment
Hide thumbs Also See for JSS-2150:
Table of Contents

Advertisement

Specifications
Transmitter
Antenna output power
Modulation method
Occupied bandwidth
Carrier suppression (J3E)
Unwanted emissions in the
out-of-band domain
Unwanted emissions in the
spurious domain
Overall distortion and noise
AF frequency response
Tone frequency
Receiver
Receiving system
1st IF
2nd IF
Reception frequency stability
Sensitivity (SINAD 20dB)
Pass band/Adjacent signal
selectivity
Spurious response
Blocking/Desensitization
Overall distortion and noise
Conducted spurious emission
Clarifier variable range
Antenna impedance
Line output
9-2
1605.0 - 3999.9 kHz
4000.0 - 27500.0 kHz
Low-power stage balanced modulation
J3E/ J2D/ H2B
F1B/ A1A
40 dB or more
Mean power of 50 mW or lower, or 43 dB or more lower
than the mean power of the basic frequency
At J3E:
1.5 to 4.5 kHz
4.5 to 7.5 kHz
7.5 kHz and upwards
(Peak power of unwanted emissions is 50 mW or less.)
At F1B:
Attenuation [dB]
-20 dB or less
Deviation is within 6 dB in 350 Hz to 2700 Hz range.
1500 Hz or 1400 Hz
Double superheterodyne
70.036 MHz
36 kHz
Within ±10 Hz
J3E
: 2.5 uV or less (1605.0 to 27500.0 kHz)
F1B
: 0.7 uV or less (1605.0 to 27500.0 kHz)
A1A
: 1.4 uV or less (1605.0 to 27500.0 kHz)
J3E
: 2.4 - 3.0 kHz
±2.1 kHz
F1B
: 270 - 300Hz
±550 Hz
J3E
: 60 dB or more
F1B
: Symbol error rate of 1% or better at a wanted
signal level of 10 uV and an unwanted signal
level of 31.6 mV separated by 750 Hz
J3E
: When an unwanted signal level separated by 3
kHz is added to the wanted signal level of 10
uV,
the
suppressing output of the wanted signal by 3
dB is 10 mV or more.
F1B
: Symbol error rate of 1% or better at a wanted
signal level of 10 uV and an unwanted signal
level of 1 mV separated by 500 Hz
When an input signal level of 30 uV is applied, the ratio
between low-frequency output 1000 Hz and unwanted
components contained in that output is 30 dB or more.
Power emitted from antenna terminal is 2 nW or less (9kHz
- 2GHz) and 20 nW or less (2GHz - 4GHz).
±200 Hz (1 Hz steps)
50Ω unbalanced
0 dBm 600Ω (balanced)
: 75/ 100Wpep
: 75/ 100/ 150Wpep
: Within 3 kHz
: Within 0.5 kHz
: 31 dB or more
: 38 dB or more
: 43 dB or more
Mistuned frequency [Hz]
(6 dB bandwidth) within
(66 dB bandwidth)
(6 dB bandwidth) within
(60 dB bandwidth)
unwanted
signal
input
voltage

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents