JRC JSS-2150 Instruction Manual page 60

Operation
6 .
6 .
6 .
Press the A N T
T U N E
- TUNE
Note
frequency is not tuned.
Even if
-
tune the antenna before making a
call.
- TUNE
out after tuning.
7 .
7 .
7 .
Communicate in CW mode using the CW
keyer connected to the KEY jack on the
controller as shown in the figure to the right.
The TX and
screen to show the equipment is transmitting.
After keying on, turns on the PA
-
Note
power automatically.
- For the sidetone setting, see "5.3.2
Sound settings".
4-10
key to tune the antenna.
blinks if the transmission
TUNE is not displayed,
lights during tuning. It goes
TXON marks appear on the