JRC JSS-2150 Instruction Manual page 58

Operation
6 .
6 .
6 .
A N T
Press the
T U N E
- TUNE
Note
frequency is not tuned.
Even if
-
tune the antenna before making a
call.
- TUNE
out after tuning.
7 .
7 .
7 .
Lift the handset from the cradle.
8 .
8 .
8 .
Press the PTT key to talk.
The TX and
screen to show the equipment is transmitting.
Releasing the PTT key returns it to receiving.
Pressing the PTT key turns on the power
Note
to the PA automatically.
9 .
9 .
9 .
When finished communicating, return the
handset to the cradle.
■
Making a radiotelephone call
1 .
1 .
1 .
Set a frequency the station to be called is monitoring.
2 .
2 .
2 .
Lift the handset from the cradle.
3 .
3 .
3 .
Press the PTT key, check that
described below.
Say the name of the station being called ... Repeat 3 times.
Say "This is..."
Say own ship name ... Repeat 3 times.
If necessary, indicate your working frequency.
"over"
4 .
4 .
4 .
Release the PTT key to listen.
5 .
5 .
5 .
Start communicating according to the response. When changing frequencies, make
sure that no other stations are using the indicated working channel.
When transmitting from your own station, always press the PTT key while talking.
-
Note
- On a simplex channel, always say "over" just before releasing the PTT key.
- Always say "out" when terminating communications.
4-8
key to tune the antenna.
blinks if the transmission
TUNE is not displayed,
lights during tuning. It goes
TXON marks appear on the
TX
■
and TXON are displayed and make a call as