Area Calls - JRC JSS-2150 Instruction Manual

Operation
4 . 5 . 2 . 2

Area calls

4 . 5 . 2 . 2
For radiotelephone or telex broadcasting, a DSC urgency area call can be made as follows.
■ ■
Procedure
1 .
1 .
1 .
Press
MENU
hierarchical menus, select 1. DSC
non-distress call.
2 .
2 .
2 .
Select Call type and press ENT to move
the cursor to the right. Then use the jog
dial to select URG/Area/TEL.
To specify the telex communication,
Note
select URG/Area/FEC.
3 .
3 .
3 .
Press ENT.
The display changes as shown to the right
and the cursor moves to Area form.
4 .
4 .
4 .
Set the area to call.
Enter as below according to the Area form
settings.
- When Center&rad
⋅
Enter the center point of the area in
Center.
⋅
Enter the radius of the area in Radius.
- When Corner&dev (shown at right)
⋅
Enter the northwest corner of the area in
Corner.
⋅
Enter the south and north/east and west
deviation in a range from 0 to 99 in
Deviation.
5 .
5 .
5 .
After the area is input, the cursor moves to
Subject.
If necessary, set the subject as Medical
TRNSP (medical transport ship) or Neutral
ship (neutral nationality).
It is fixed at No information when
Note
the power is turned on. For details,
see "4.5.2.3 Special calls (medical
transport/neutral ship)".
4-56
key, and through
1)DSC non-distress call
Call type :[RTN/Indv/TEL
Address :[ ]
Calling FRQ:[Tx 2177.0kHz]
:[Rx 2177.0kHz]
Working FRQ:[Tx . kHz]
[Rx . kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[URG/Area/TEL
Address :[ ]
Calling FRQ:[Tx 2177.0kHz]
:[Rx 2177.0kHz]
Working FRQ:[Tx . kHz]
[Rx . kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[URG/Area/TEL
Area form :[Center&rad]
- Center :[89ﾟN179ﾟE]
- Radius :[0500NM]
Subject :[No information]
Calling FRQ:[ 2187.5kHz]
Working FRQ:[ 2182.0kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[URG/Area/TEL
Area form :[Corner&dev]
- Corner :[ ﾟN ﾟE]
- Deviation:[ ﾟ/ ﾟ]
Subject :[No information]
Calling FRQ:[ 2187.5kHz]
Working FRQ:[ 2182.0kHz]
[Call] [Preview] [Cancel]
1)DSC non-distress call
Call type :[URG/Area/TEL
Area form :[Center&rad]
- Center :[89ﾟN179ﾟE]
- Radius :[0500NM]
Subject :[No information]
Calling FRQ:[ 2187.5kHz]
Working FRQ:[ 2182.0kHz]
[Call] [Preview] [Cancel]
]
]
]
]
]