Emergency Calls (Dsc Safety/Urgency/Distress Calls); Safety Calls; Individual Calls - JRC JSS-2150 Instruction Manual

Operation
4.5 Emergency calls
In emergency, the DSC is available for safety, urgency, or distress calls. For safety and urgency
calls, either individual calls or area calls is selectable for the type of call. For distress calls,
enabled to send either after entering the nature of distress or frequency, or without entering
anything. In both cases, pressing the
4.5.1

Safety calls

4 . 5 . 1 . 1

Individual calls

4 . 5 . 1 . 1
For radiotelephone or telex communication, a DSC safety call can be made as follows.
■ ■
Procedure
1 .
1 .
1 .
Press
MENU
hierarchical menus, select 1. DSC
non-distress call.
2 .
2 .
2 .
Select Call type and press ENT to move
the cursor to the right. Then use the jog
dial to select SAF/Indv/TEL.
To specify the telex communication,
Note
select SAF/Indv/ARQ or
SAF/Indv/FEC.
3 .
3 .
3 .
Press ENT.
The text displayed in Calling FRQ and
Working FRQ changes as shown to the right,
and the cursor moves to Address.
4 .
4 .
4 .
Select Address and press ENT to move
the cursor to the right and input the
station's 9-digit MMSI.
4-44
(DSC safety/urgency/distress calls)
DISTRESS
key, and through
key is required to send the distress call.
1)DSC non-distress call
Call type
Address
Calling FRQ:[Tx
Working FRQ:[Tx
[Call] [Preview]
1)DSC non-distress call
Call type
Address
Calling FRQ:[Tx
Working FRQ:[Tx
[Call] [Preview]
1)DSC non-distress call
Call type
Address
Calling FRQ:[ 2187.5kHz]
Working FRQ:[ 2182.0kHz]
[Call] [Preview]
1)DSC non-distress call
Call type
Address
Calling FRQ:[ 2187.5kHz]
Working FRQ:[ 2182.0kHz]
[Call] [Preview]
:[RTN/Indv/TEL ]
:[ ]
2177.0kHz]
:[Rx 2177.0kHz]
. kHz]
[Rx . kHz]
[Cancel]
:[SAF/Indv/TEL ]
:[ ]
2177.0kHz]
:[Rx 2177.0kHz]
. kHz]
[Rx . kHz]
[Cancel]
:[SAF/Indv/TEL ]
:[ ]
[Cancel]
:[SAF/Indv/TEL ]
:[0 ]
[Cancel]