JRC JSS-2150 Instruction Manual page 83

Scanning of channels in telex mode
（ ２ ）
The scanning of channels in the telex mode is started with the data terminal.
■ ■
Procedure
1 .
1 .
1 .
If displaying the message of "Press Enter key to get the access right in the NBDP
mode..." on the data terminal, press Enter key on the keyboard.
The operation of the data
terminal becomes possible in
the telex mode, except when
the controller is used.
2 .
2 .
2 .
On the main menu and the dropdown menu, select Tune
key.
The registered station list is
displayed.
3 .
3 .
3 .
Select the radio station having the channel group to be scanned with the cursor, and
press Enter key.
The antenna is tuned to the
every frequency registered in
the selected radio station. The
screen at right is displayed
while tuning the antenna.
4 .
4 .
4 .
After completing the antenna tuning, scanning starts.
The screen as shown at right
is displayed while scanning.
When receiving a call by the
ARQ or FEC mode, scanning
stops and the communication
starts. After finishing the
communication, scanning
restarts automatically.
The scanning speed can be
changed with the menu on the
regular screen, as System
Scan speed.
When breaking the scanning,
select Tune
N o . S t a t i o n N a m e
1 S t a t i o n 0 1 1 S t a t i o n 0 1
2 S t a t i o n 0 2
3 S t a t i o n 0 3
4
5
6
7
8
9
1 0
Scanning stop.
Scanning start with Enter
S t a t i o n s e l e c t i o n
I D L o c a t i o n
0 0 4 3 1 0 1 2 3 0 0 4 3 1 0 1 2 3 N 3 3 ﾟ 4 5 ' E 1 3 8 ﾟ 1 2 ' N 3 3 ﾟ 4 5 ' E 1 3 8 ﾟ 1 2 '
0 0 4 3 1 1 2 3 4 N 3 7 ﾟ 2 2 ' E 1 3 5 ﾟ 5 1 '
4 3 1 0 1 2 3 4 5
Operation
F . S i g
D O T D O T D O T D O T [ S e l e c t ]
D O T D O T [ C a n c e l ]
↓
4-33