Registering Station List - JRC JSS-2150 Instruction Manual

5.7.2

Registering station list

■ ■
Procedure
1 .
1 .
1 .
If displaying the message of "Press Enter key to get the access right in the NBDP
mode..." on the data terminal, press Enter key on the keyboard.
The operation of the data
terminal becomes possible in
the telex mode, except when
the controller is used.
2 .
2 .
2 .
On the main menu and the dropdown menu, select Service
key.
The station list is displayed.
3 .
3 .
3 .
Select the line to be registered newly or to be changed with the cursor and press
Enter key. Then input the station information including the channels on the station list
edit screen.
Input the radio station name
within 16 characters to Station
Name column.
(The @ character is unavailable.)
Input 4 (coast station), 5 (ships
station) or 9 digits SELCAL
number to Station ID column.
The Location and Free CH Sig
are optional.
Move the cursor to the line to
be registered and press Enter
key. Then input the Tx/Rx
frequencies on the popup
screen at right.
4 .
4 .
4 .
After inputting, press Enter key to close the screen and finish the registration.
Settings & Registrations
Station list with Enter
5-15