Suzuki DL650K5 Service Manual page 75

• Remove the rear cylinder head cover 4.
• Remove the dowel pin 5 and O-ring 6.
FRONT CAMSHAFTS
• Turn the crankshaft to bring the "F" line A on generator rotor
to the index mark B of the valve inspection hole and also to
bring the cams to the position as shown in illustration.
NOTE:
* At the above condition, the front cylinder is at TDC of com-
pression stroke.
* Before removing the camshafts, inspect the valve clearance.
( ! 2-8)
• Remove the cam chain guide 1.
ENGINE 3-21