Suzuki DL650K5 Service Manual page 161

EXHAUST PIPE
• Tighten the exhaust pipe bolts 1 to the specified torque.
$ Exhaust pipe bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
#
Use the new gasket to prevent exhaust gas leakage.
WATER UNION
• Install the O-ring to the water union.
#
Replace the O-ring with a new one.
• When installing the water union, apply engine coolant to the
O-ring.
/ ENGINE COOLANT
INTAKE PIPE
• Apply SUZUKI SUPER GREASE to the O-ring.
' 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
#
Use the new O-ring to prevent air from sucking
through the joint.
• Make sure that the "UP" mark A faces upward.
• Install the intake pipes.
NOTE:
The intake pipe can be identified by the mark B .
F: Front cylinder head intake pipe
R: Rear cylinder head intake pipe
ENGINE 3-107