Suzuki DL650K5 Service Manual page 113

• Install the oil strainer 3.
NOTE:
Fit the projection A of the oil strainer 3 in the concave portion
of the crankcase.
• Install the oil strainer plate 2 and tighten the oil starainer
plate screw to the specified torque.
$ Oil strainer plate screw: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
OIL JET
Removal
• Remove the oil jets 1, 2 from the left and right crankcase
halves.
• Remove the oil seal 3 and oil gallery plug 4.
• Remove the oil jet 5 from left crankcase half.
NOTE:
If it is difficult to remove the oil jet, use a sting.
ENGINE 3-59