Suzuki DL650K5 Service Manual page 160

3-106 ENGINE
CYLINDER HEAD COVER
• Pour engine oil in each oil pocket in the front and rear cylinder
heads.
NOTE:
Be sure to check the valve clearance. ( ! 2-8)
• Install the dowel pins 1 and O-rings 2.
• Install the new gaskets to each cylinder head cover.
• Apply SUZUKI BOND to the cam end caps of the gaskets.
+ 99104-31140: SUZUKI BOND "1207B" (USA)
. 99000-31110: SUZUKI BOND "1215" (Others)
#
Use the new gaskets to prevent oil leakage.
• The cylinder head covers can be distinguished by the
embossed letters A.
"F": Front cylinder head cover
"R": Rear cylinder head cover
• Install the cylinder head covers on each cylinder head.
• Fit the gaskets 3, 4 to each head cover bolt.
#
Use the new gaskets to prevent oil leakage.
NOTE:
The metal side of the gasket 3 must face to the bolt flange.
• After applying engine oil to the gaskets tighten the head cover
bolts to the specified torque.
$ Head cover bolt: 14 N·m (1.4 kgf-m, 10.0 lb-ft)