Suzuki DL650K5 Service Manual page 388

8-26 ELECTRICAL SYSTEM
• Repeat the above procedure a few times and measure the
highest ignition coil primary peak voltage.
' Tester knob indication: Voltage (&)
$ Ignition coil primary peak voltage: 150 V and more
0
While testing, do not touch the tester probes and
spark plugs to prevent receiving an electric shock.
• If the peak voltage is lower than the specified values, inspect
the ignition coil. (!8-26)
IGNITION COIL RESISTANCE
• Lift and support the fuel tank. (!5-7)
• Disconnect the spark plug caps and ignition coil lead wires.
Measure the ignition coil resistance in both the primary and sec-
ondary windings. If the resistance is not within the standard
range, replace the ignition coil with a new one.
# 09900-25008: Multi circuit tester set
( Tester knob indication: Resistance (Ω)
$ Ignition coil resistance
: 2 – 5 Ω (+ terminal – - terminal)
Primary
Secondary : 24 – 37 kΩ (Plug cap – + terminal)
Ω
kΩ