Suzuki DL650K5 Service Manual page 145

• Hold the clutch sleeve hub with the special tool.
" 09920-53740: Clutch sleeve hub holder
• Tighten the clutch sleeve hub nut to the specified torque.
$ Clutch sleeve hub nut: 50 N·m (5.0 kgf-m, 36.0 lb-ft)
• Bend the lock washer to lock the nut securely.
• Install the spring washer seat 7 and spring washer 8 onto
the clutch sleeve hub correctly.
• Insert the clutch drive plates 9, 0 and driven plates A one
by one into the clutch sleeve hub in the prescribed order, No.2
drive plate 9 being inserted first.
NOTE:
Apply the ENGINE OIL to the clutch driven and drive plates
before installing them.
9 No.2 Drive plate 0 No.1 Drive plate A Direction of inside.
8.3 mm
(0.33 in)
ENGINE 3-91
11.3 mm
(0.44 in)