Gearshift Shaft/Gearshift Arm - Suzuki DL650K5 Service Manual

• Install the snap ring 2.

GEARSHIFT SHAFT/GEARSHIFT ARM

DISASSEMBLY
• Remove the following parts from the gearshift shaft/gearshift
arm.
1 Washer
2 Snap ring
3 Gearshift shaft return spring
4 Snap ring
INSPECTION
Check the gearshift shaft/gearshift arm for wear or bend.
Check the return springs for damage or fatigue.
REASSEMBLY
• Install the following parts to the gearshift shaft/gearshift arm
as shown in the right illustration.
1 Washer
2 Snap ring
3 Gearshift shaft return spring
4 Snap ring
NOTE:
When installing the gearshift shaft return spring 3 , position the
stopper B of the gearshift arm between the shaft return spring
ends A .
5 Washer
6 Plate return spring
7 Gearshift cam drive plate
5 Washer
6 Plate return spring
7 Gearshift cam drive plate
ENGINE 3-71