Suzuki DL650K5 Service Manual page 379

• Install the washers 2 (12 × 6.5 × 2), washer 3 (16 × 6.5 × 1),
washer 4 (14 × 6.5 × 1) and nut 5.
"
Replace the O-rings with the new ones to prevent oil
leakage and moisture.
• Install the washers 6.
NOTE:
The number of washer 6 varies according to individual.
• Install the seal rings 8 to starter motor case 7.
• When install the rear bracket to starter motor case, align the
marks A on the rear bracket with cut point B at the starter
motor case.
"
Replace the seal rings with the new ones to prevent oil
leakage and moisture.
• Install the washers 9 slip washer 0 and thrust stopper A.
NOTE:
The number of washer 9 varies according to individual.
• Install the front bracket.
• Align the marks C on the front bracket with the marks B on
the starter motor case.
ELECTRICAL SYSTEM 8-17