Suzuki DL650K5 Service Manual page 309

• Set the punch mark C on the handlebar clamp forward.
• Tighten the handlebar clamp bolts to the specified torque.
! Handlebar clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
When tightening the handlebar clamp bolts, first tighten the bolt
1 and then tighten the bolt 2 .
HANDLEBAR SWITCH BOX
• Install the throttle cable case.
• Apply SUZUKI SUPER GREASE to the throttle cables and
their holes.
' 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Align the mating surface B of the throttle case with the punch
mark A on the handlebars.
• Install the right handlebar switch box to the handlebars by
engaging the stopper 1 with the handlebar's hole 2.
• Install the front brake master cylinder. ("7-67)
• Install the handlebars with the punch mark C aligned with the
mating surface D of the clutch lever holder.
CHASSIS 7-33