Table of Contents
Advertisement
Troubleshooting
Some held jobs were not restored
Touch Continue to delete the specified job.
Note: Held jobs that are not restored stay on the hard disk and are inaccessible.
Unsupported camera mode, unplug camera and change mode
The camera mode does not support PictBridge.
Unplug the camera, change the mode and plug the camera back into the printer.
Unsupported disk
An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.
30.xx [Color] cartridge missing
Try one or more of the following:
•
Remove and reinstall the specified toner or print cartridge. For instructions on removing a toner or print cartridge,
touch More information.
•
Install a new toner or print cartridge, following the instruction sheet that came with the replacement part.
30.xx Missing [color] cartridge and/or [color] imaging kit
Try one or more of the following:
•
Remove and reinstall the specified toner or print cartridge, or imaging kit. For instructions on removing a cartridge
or imaging kit, touch More information.
•
Install a new cartridge or imaging kit, following the instruction sheet that came with the replacement part.
31.xx Defective [color] cartridge
The specified toner cartridge is either missing or not functioning properly. Try one or more of the following:
•
Remove the specified toner cartridge, and then reinstall it.
•
Remove the specified toner cartridge, and then install a new one.
31.xx Defective imaging kit
The imaging kit is either missing or not functioning properly. Try one or more of the following:
•
Remove the imaging kit, and then reinstall it.
•
Remove the imaging kit, and then install a new one.
32.xx Replace unsupported [color] cartridge
Remove the unsupported toner or print cartridge, and then install a supported one.
237
Advertisement
Table of Contents
