Table of Contents
Advertisement
Understanding the printer menus
Use
Factory Defaults
Do Not Restore
Restore Now
Export Compressed Logs File
Export
Copy Settings menu
Use
Content Type
Text
Graphics
Text/Photo
Photo
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Color
Auto
On
Off
Auto Color Detect
Color Sensitivity
1–9
Area Sensitivity
1–9
Allow color copies
On
Off
To
Use the printer factory default settings.
Notes:
•
Do Not Restore is the factory default setting.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads stored
in the flash memory or in a hard disk are not affected.
Export configuration files to a flash drive.
To
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Specify how the original document was produced.
Note: Color Laser is the factory default setting.
Specify whether copies are printed in color.
Note: On is the factory default setting.
Set the amount of color the printer can detect from the original document.
Note: This menu item is applicable only when Color is set to Auto.
Enable color in copies.
Notes:
•
On is the factory default setting.
•
Setting this to Off hides all color‑specific menus.
•
This setting overrides the Color setting.
150
Advertisement
Table of Contents
