Table of Contents
Advertisement
Understanding the printer menus
Use
Timeouts
Wait Timeout
Disabled
15–65535
Timeouts
Job Hold Timeout
5–255
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do Nothing
Sleep
Press and Hold Sleep Button
Do Nothing
Sleep
To
Set the amount of time the printer waits for additional data before
canceling a print job.
Notes:
•
40 seconds is the factory default setting.
•
Wait Timeout is available only when the printer is using
PostScript emulation.
Set the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue.
Notes:
•
30 is the factory default setting.
•
This menu item appears only when a hard disk is installed.
Let the printer automatically continue printing from certain offline
situations when not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to print the entire page.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: Do Nothing is the factory default setting.
149
Advertisement
Table of Contents
