Table of Contents
Advertisement
Understanding the printer menus
Fax Receive Settings
Use
Enable Fax Receive
On
Off
Enable Caller ID
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multipurpose Feeder
Manual Feeder
Separator Sheets
Off
Before Job
After Job
Separator Sheet Source
Tray [x]
Manual Feeder
Sides (Duplex)
Off
On
Fax Footer
On
Off
Fax Footer Time Stamp
Print Time
Receive Time
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Display the caller ID information of an incoming fax.
Note: On is the factory default setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Specify the paper source for the separator sheet.
Note: Tray 1 is the factory default setting.
Enable two‑sided printing for incoming fax jobs.
Note: Off is the factory default setting.
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Print the time when the fax was received.
Note: Receive Time is the factory default setting.
159
Advertisement
Table of Contents
