Table of Contents
Advertisement
Understanding the printer menus
Menu item
Enable IPv6
On
Off
Auto Configuration
On
Off
Set Hostname
View Address
View Router Address
Enable DHCPv6
On
Off
AppleTalk menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network [x] > Network [x] Setup > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the network]
Description
Enables IPv6 in the printer
Note: On is the factory default setting.
Specifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
Lets you view or change the current IPv6 host name
Lets you view the current setting
Note: These settings can be changed only from the Embedded Web
Server.
Enables DHCPv6 in the printer
Note: On is the factory default setting.
To
Enable or disable AppleTalk support.
Note: No is the factory default setting.
Show the assigned AppleTalk name.
Note: The AppleTalk name can be changed only from the Embedded Web
Server.
Show the assigned AppleTalk address.
Note: The AppleTalk address can be changed only from the Embedded Web
Server.
Provide a list of AppleTalk zones available on the network.
Note: The default zone for the network is the factory default setting.
135
Advertisement
Table of Contents
