Table of Contents
Advertisement
3) Inspect the turn signal switch for continuity with a
tester. If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebar Removal and Installation in
Section 6B (Page 6B-3)".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity (
)
Color
B/G
Position
L
PUSH
R
4) After finishing the turn signal switch inspection,
reinstall the removed parts.
Passing Light Switch Inspection
Inspect the passing light switch in the following
procedures:
1) Remove the left fuel tank cover. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-14)".
2) Disconnect the left handlebar switch coupler (1).
1
3) Inspect the passing light switch for continuity with a
tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebar Removal and Installation in
Section 6B (Page 6B-3)".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity (
)
Color
G/B
Position
PUSH
B/Br
B
I649G1920037-02
B823H19206021
I823H1920044-01
Dg
I649G1920038-02
4) After finishing the passing light switch inspection,
reinstall the removed parts.
Dimmer Switch Inspection
Inspect the dimmer switch in the following procedures:
1) Remove the left fuel tank cover. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-14)".
2) Disconnect the left handlebar switch coupler (1).
1
3) Inspect the dimmer switch for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebar Removal and Installation in
Section 6B (Page 6B-3)".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity (
)
Color
Dbr
Position
HI
LO
4) After finishing the dimmer switch inspection, reinstall
the removed parts.
Lighting Systems:
9B-16
B823H19206022
I823H1920045-01
Dg
G/B
I718H1920046-04
Advertisement
Chapters
Table of Contents
