Suzuki GSX1300BK B-King Service Manual page 431

1J-8 Charging System:
• Install the rotor bolt with the washer.
• Hold the generator rotor with the special tool and
tighten its bolt to the specified torque.
Special tool
(A): 09930–44530 (Rotor holder)
Tightening torque
Generator rotor bolt (a): 120 N·m (12.0 kgf-m, 87.0
lb-ft)
(a)
• Apply a bond lightly to the mating surfaces at the
parting line between the upper and lower crankcases
as shown.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
• Install the dowel pins and new gasket (3).
!
Use a new gasket to prevent oil leakage.
(A)
• Install the generator cover and tighten the generator
cover bolts.
!
I823H11A0014-01
Be careful not to pinch the finger between the
generator cover and crankcase.
I823H11A0015-01
CAUTION
WARNING
3
I823H11A0016-01
I823H11A0017-01