Oil Pressure Regulator / Oil Strainer Inspection; Oil Cooler / Oil Cooler Hose Inspection And Cleaning - Suzuki GSX1300BK B-King Service Manual

1E-8 Engine Lubrication System:
• Tighten the oil pan bolts diagonally.
CAUTION
!
• Use the new oil pan gasket to prevent oil
leakage.
• Fit a new gasket washer to the oil pan bolt
(1) to prevent oil leakage.
1
• After installing the removed parts, pour engine oil and
engine coolant. Refer to "Engine Oil and Filter
Replacement in Section 0B (Page 0B-10)" and
"Cooling System Inspection in Section 0B (Page 0B-
13)".

Oil Pressure Regulator / Oil Strainer Inspection

Refer to "Oil Pan / Oil Strainer / Oil Pressure Regulator
Removal and Installation (Page 1E-6)".
Oil pressure regulator
Inspect the operation of the oil pressure regulator by
pushing on the piston with a proper bar.
If the piston does not operate, replace the oil pressure
regulator with a new one.
Oil Strainer
Clean the oil strainer if necessary.
Inspect the oil strainer body for damage. If necessary,
replace it with a new one.
Oil Cooler / Oil Cooler Hose Inspection and
Cleaning
Oil Cooler Hose Inspection
I823H1150011-02
Inspect the oil cooler hoses for any damage and oil
leakage. If any defects are found, replace the oil cooler
hose with new ones.
B823H11506004
Oil Cooler Inspection
Inspect the oil cooler for oil leakage. If any defects are
found, replace the oil cooler with a new one. If the fins
are bent or dented, repair them by carefully straightening
them with the blade of a small screwdriver.
I718H1150033-01
I823H1150012-01
B823H11506013
I823H1150024-01
I823H1150025-01