Water Hose Removal And Installation; Radiator Reservoir Tank Removal And Installation - Suzuki GSX1300BK B-King Service Manual

1F-8 Engine Cooling System:

Water Hose Removal and Installation

Removal
1) Remove the frame body cover and under cowl. Refer
to "Exterior Parts Removal and Installation in Section
9D (Page 9D-14)".
2) Drain engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-13)".
3) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
10)".
4) Remove the water hose as shown in the water hose
routing diagram. Refer to "Water Hose Routing
Diagram (Page 1F-3)".
Installation
1) Install the water hose as shown in the water hose
routing diagram. Refer to "Water Hose Routing
Diagram (Page 1F-3)".
2) Pour engine coolant and bleed air from the cooling
circuit. Refer to "Cooling System Inspection in
Section 0B (Page 0B-13)".
3) Reinstall the fuel tank. Refer to "Fuel Tank Removal
and Installation in Section 1G (Page 1G-10)".
4) Install the frame body covers and under cowl. Refer
to "Exterior Parts Removal and Installation in Section
9D (Page 9D-14)".
Radiator Reservoir Tank Removal and
Installation
Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
10)".
2) Disconnect the following couplers:
• HO2 sensor coupler (1)
• Rear brake switch coupler (2)
• Oil pressure switch coupler (3)
• Speed sensor coupler (4)
3) Remove the harness band (5).
4) Remove the reservoir tank bolt (6).
1
3
4
B823H11606006
B823H11606008
6
2
5
I823H1160016-01
5) After moving the reservoir tank (7) up, disconnect
the reservoir hose (8).
6) Remove the reservoir tank and drain engine coolant.
Installation
Install radiator reservoir tank in the reverse order of
removal. Pay attention to the following point:
• Fill the reservoir tank to the upper level "A". Refer to
"Cooling System Inspection in Section 0B (Page 0B-
13)".
"A": Upper level
7
8
I823H1160017-01
"A"
I823H1160018-01