Suzuki GSX1300BK B-King Service Manual page 319

1D-83 Engine Mechanical:
Gearshift System
• Install the gearshift cam stopper (1), bolt (2), washer
(3) and return spring (4).
• Apply a small quantity of thread lock to the gearshift
cam stopper bolt (2) and tighten it to the specified
torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
NOTE
Hook the return spring end "A" to the
stopper (1).
Tightening torque
Gearshift cam stopper bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lb-ft)
4
3
1
2
(a)
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
1
2
I823H1140239-02
"A"
I823H1140487-03
• Install the gearshift cam stopper plate (5).
NOTE
Align the gearshift cam pin "B" with the
gearshift cam stopper plate hole "C".
5
"C"
• Apply a small quantity of thread lock to the gearshift
cam stopper plate bolt (6) and tighten it to the
specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gearshift cam stopper plate bolt (b): 13 N·m (1.3
kgf-m, 9.5 lb-ft)
• Install the gearshift shaft assembly (7) and washers
(8) as shown in the figure.
NOTE
Pinch the gearshift arm stopper with return
spring ends.
8
7
"B"
I823H1140488-02
6
(b)
I823H1140489-04
I823H1140490-04