Regulator / Rectifier Construction
1. Regulator/rectifier
Regulator / Rectifier Removal and Installation
Removal
1) Turn the ignition switch OFF.
2) Disconnect the regulator/rectifier couplers (1).
3
2
2
2. Clamp
B823H11A06011
1
I823H11A0019-01
(a)
3. Under cowling
3) Remove the under cowling. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
14)".
4) Remove the regulator/rectifier as shown in the
regulator/rectifier construction. Refer to "Regulator /
Rectifier Construction (Page 1J-9)".
Installation
Install the regulator/rectifier as shown in the regulator/
rectifier construction. Refer to "Regulator / Rectifier
Construction (Page 1J-9)".
Charging System:
B823H11A06005
1
(a)
I823H11A0018-01
: 10 N m (1.0 kgf-m, 7.0 lb-ft)
1J-9