Suzuki GSX1300BK B-King Service Manual page 324

Crankcase Breather (PCV) Cover
• Apply bond to the mating surface of the breather
cover.
NOTE
• Make surfaces free from moisture, oil, dust
and other foreign materials.
• Spread the sealant on surfaces thinly to
form an even layer, and assemble the
breather cover within a few minutes.
• Apply to distorted surfaces as it forms a
comparatively thick film.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
1
1. Crankcase breather (PCV) cover
: Apply bond.
• Install the crankcase breather (PCV) cover (2).
Tightening torque
PCV cover bolt (a): 10 N·m (1.0 kgf-m, 7.0 lb-ft)
I823H1140308-01
2
(a)
I823H1140507-02
• Install the reed valve (3).
• Install the reed valve cover (4).
Tightening torque
PCV reed valve cover bolt (b): 10 N·m (1.0 kgf-m,
7.0 lb-ft)
Engine Top Side
• Assemble the engine top side. Refer to "Engine Top
Side Disassembly (Page 1D-28)".
Crankcase Breather (PCV) Hose
• Install the crankcase breather (PCV) hose (1).
Engine Mechanical: 1D-88
3
I823H1140506-01
(b)
4
I823H1140508-02
1
I823H1140405-01