Suzuki GSX1300BK B-King Service Manual page 222

EVAP System Purge Control Solenoid Valve
Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
10)".
2) Disconnect the coupler (1) and purge hoses (2).
3) Remove the EVAP system purge control solenoid
valve (3).
1
Installation
1) Install the EVAP system purge control solenoid valve
as shown in the EVAP canister hose routing
diagram. Refer to "EVAP Canister Hose Routing
Diagram (Only for E-33) (Page 1B-8)".
2) Reinstall the removed parts.
Tank Pressure Control Valve
Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
10)".
2) Disconnect the surge hoses (1).
3) Remove the tank pressure control valve (2).
Installation
1) Install the tank pressure control valve as shown in
the EVAP canister hose routing diagram. Refer to
"EVAP Canister Hose Routing Diagram (Only for E-
33) (Page 1B-8)".
2) Reinstall the removed parts.
3
2
I823H1120028-01
1
2
I823H1120029-02
Emission Control Devices:
Fuel Shut-off Valve
Removal
1) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
10)".
2) Remove the EVAP canister. Refer to "Evaporative
Emission Control System Removal and Installation
(Only for E-33) (Page 1B-14)".
3) Remove the TPC valve/Fuel shut-off valve bracket
(1) from the frame.
4) Disconnect the surge hoses (2).
5) Remove the fuel shut-off valve (3).
2
Installation
1) Install the fuel shut-off valve as shown in the EVAP
canister hose routing diagram. Refer to "EVAP
Canister Hose Routing Diagram (Only for E-33)
(Page 1B-8)".
2) Reinstall the removed parts.
1B-15
1
I823H1120030-01
3
I823H1120031-01