Brake Control System and Diagnosis
Brake
Front Brake Hose Routing Diagram
2
1. Stopper
: After the brake hose union has contacted the stopper, tighten the union bolt.
2. Hose guide
: Fit the grommet sleeve on the brake hose to the hose guide properly.
3. Brake hose clamp
: Insert the clamp to the hole of the front fender fully.
4. Green paint marking
: Locate the green paint marking on the brake hose No. 2 to the right side of the brake hose clamp and it
faces top side.
Schematic and Routing Diagram
" b "
1
(a)
2
" a "
(a)
Brake Control System and Diagnosis:
" a "
LH
" a "
" b "
1
B823H14102001
RH
4
3
(a)
" c"
" b "
1
I823H1410047-02
"a": 21
"b": 28
"c": 35
: 23 N m (2.3 kgf-m, 16.5 lb-ft)
4A-1