Remote Oil Fill Kit (Optional) - BRP Evinrude Installation Manual

Oil Tank Profiles
1.8 Gallon Tank
P/N 176995

Remote Oil Fill Kit (Optional)

The remote oil fill kit (P/N 176461) provides a
deck-mounted fill tube, cap, a tank-mounted tube,
and nut that replace the original oil tank cap
assembly.
Installation Recommendations
•
Select a location on the deck of the boat that is
above the oil tank fill cap.
•
Select a deck location which allows the required
length of 1½ in. I.D. fill hose to route as directly
and as vertically as possible.
•
Avoid inappropriate hose routings that could
distort the fill tube or tank tube.
•
Refer to installation instructions provided with
remote oil fill kit.
NOTICE
A slanted area of the deck will allow
water to drain away from the fill and is best
suited for the installation.
REMOTE OIL TANK INSTALLATION (V4 – V6)
3 Gallon Tank
P/N 176996
Additional Items Required
•
1½ in. I.D. fill hose cut to required length. Fill
hose (P/N 123956) is available in 25 ft. (7.6 m)
lengths.
•
Two corrosion resistant 2 in. (50 mm) hose
clamps.
BOAT RIGGING
1
DRC8123
25