BRP Evinrude Installation Manual page 51

40–65 HP, M T
ANUAL ILT
Manual tilt models require Transom Mounting Kit,
P/N 394219. The kit includes a transom mounting
plate and hardware for fastening outboard to tran-
som.
1
1. Transom mounting plate
The kit also includes clamp pads, P/N 315774,
which must be used to secure mounting bolts in
slots at the bottom of the outboard stern brackets.
1
1. Clamp pad
M
ODELS
18961
COB2505
OUTBOARD INSTALLATION
OUTBOARD MOUNTING
Install the mounting bolts through the stern brack-
ets and transom. Install round backing plates and
locknuts onto bolts and tighten securely.
1
2
1. Transom mounting plate
2. Round backing plates
3. Locknuts
25–30 HP, M T
ANUAL ILT
15 HP, P T M
OWER ILT ODELS
Install the mounting bolts through the stern brack-
ets and transom. Install round backing plates and
locknuts onto bolts and tighten securely.
1
1. Round backing plates
2. Locknuts
3. Nut and washer (15 HP)
3
008015
M
ODELS
3
2
008014
49
2