Oil Filters And Oil Reservoir; Air Silencer; Hoses And Connections - BRP E250DHLSCS Service Manual

Oil Filters and Oil Reservoir

Perform visual inspections to identify oiling system
leaks. Make certain the oil tank is filled and oil
supply is not contaminated.
Evinrude E-TEC V model outboards are equipped
with two serviceable oil filters: one is located in the
oil injection tank, and one is located in the oil sup-
ply line before the oil lift pump.
Sample oil from bottom of oil injection tank. Con-
firm that oil is free of water or other contaminants..
1
1. Filter, oil supply line
2. Filter, oil injection tank

Air Silencer

The air silencer on Evinrude outboards maximizes
air flow while minimizing noise.
Routine cleaning of the air silencer is recom-
mended to remove any accumulation of debris.
2

Hoses and Connections

Check condition of all hoses and connections in
both the fuel and oil systems:
004250
Visually inspect all components.
•
42785
Observe all clamps, hoses, and connections
•
while outboard is running.
Replace all damaged components.
•
Repair all leaks.
•
Failure to check for fuel leakage could
allow a leak to go undetected, resulting in
fire or explosion.
MAINTENANCE
FUEL AND OIL SYSTEMS
WARNING
3
004218
81