BRP Evinrude Installation Manual page 31

Clamp Installation
A constant stress should be applied to close the
ear clamps. This method ensures a positive stress
on the hose and does not result in excessive com-
pression or expansion of the band material.
IMPORTANT:
Use only Oetiker recommended
tools to close Oetiker stepless clamps.
Oetiker pincers are available in the Evinrude/
Johnson Genuine Parts and Accessories Catalog.
•
Position correct size clamp over hose.
•
Install hose on fitting.
•
Close clamp ear fully with Oetiker pincers (pli-
ers).
1 2
1. Open clamp
2. Closed clamp
CABLE AND HOSE INSTALLATION
Clamp Removal
Method 1: Position Oetiker pincers across clamp
ear and cut clamp.
Method 2: Lift end of stepless clamp with screw-
driver.
DP0886
Method 3: Use Oetiker pincers (pliers) to grip
clamp. Pull clamp off of connection and discard.
000092
BOAT RIGGING
1
000108
000090
000091
29