Chery QQ Service Manual page 577

–
Supporting board for fasteners (A)
Remove:
–
Mounting bracket for lifting ring (B)
–
Energy storage
Rotate the control shaft a quarter turns by using a
screwdriver so as to loosen it.
Remove the hydraulic unit
Remount it
Check whether positions of the two half-moon parts
are correct.
PDF created with pdfFactory Pro trial version
CHERY SQR7080 EZ Drive SERVICE MANUAL
Remove the transmission support from the vehicle
body.
Lower the transmission as possible as you can and
take off the control shaft cover.
Smear MOLYKOTE 33 (moderate) onto the two
half-moon parts.
Place the control shaft onto the drive mechanism
module and lock it.
Screwdriver impression and shaft pin should be
aligned respectively with the marks.
Put the flat washer in place.
Remount the hydraulic unit onto the transmission.
www.pdffactory.com