Dampener; Vertical Swinging Arm And Its Sleeve - Chery QQ Service Manual

Chery QQ Service Manual
II. Dampener
Removal
1 Lift up the car and remove the bolts joining
the dampener with the car bridge.
2 Remove the joining bolt for the dampener and
the car body.
3 Remove the dampener assembly.
Steps of installation:
1. Do the installation by referring to the steps of
dismounting.
2. Points of attention:
In the screw tightening process, the fastening
bolts controlled by torque + corner tightening
submission limits should be replaced after each
action of loosening.
The screws should be tightened to the specified
torques after the installation.
III.
sleeve
Removal
1 Remove the left and right rear wheels.
2 Remove the joining bolt for the vertical
swinging arm and the rear bridge.
85
Chery Automobile Co., Ltd
Chassis System
Vertical swinging arm and its