Mode Selection (Mode); Clock Function Key (Clk); Automatic Preset Save Key (As) - Chery QQ Service Manual

Chery QQ Service Manual BCM Computer Control System

(2) Mode selection (MODE)

Press (3) key repeatedly and you will be able to select the function modes in the
following order: VOL→BAS→TRE→BL→ FA→VOL.
In each mode, press "+" or "-" to adjust electrical frequency for each mode.
VOL
Press "+" or "-" to adjust volume electrical frequency in the range of 0-63.
BAS
Press "+" or "-" to adjust BAS volume in the range of –7 to 7.
TRE
Press "+" or "-" to adjust the volume of left or right sound track in the electrical
frequency range of 15L to 15R.
FA
Press "+" or "-" to adjust the volume of left or right sound track in the electrical
frequency range of 15L to 15R.
(3) Waveband function selection key (BD)
Press (4) key repeatedly to select the functions in the following order:
FM2 →FM2→ FM3→FM4 →AM1→ AM2
When the desired waveband is selected, press " " or " " to select radio stations
manually or automatically. When the desired radio station is selected, press (3) and "+"
or "-" to adjust volume.

(4) Clock function key (CLK)

Press (5) key to toggle between radio frequency and clock display. In the radio mode,
press CLK, and the clock will be displayed for five seconds before the radio mode
returns. Press this key for a long time and simultaneously press " " or " ", and then
the time (hour and minute) can be adjusted.

(5) Automatic Preset Save key (AS)

Press (6) key and hold for less than two seconds, and then the preset radio stations set by
using this key will be displayed one by one. However, by pressing this key and hold for
more than two seconds, you will have the character of "ATP" displayed and the device
started to scan the radio status automatically. At the same time, six effective radio
stations will be automatically saved and the device will start to repeat the order of the six
stations until users select one of them by pressing a key (1-6).
- 92 -